INSTRUCTIONS FOR LICENSE UPDATE ON QBOX


1) You will need a USB flash drive formatted to FAT 32. Connect a USB or PS/2 keyboard to the QBox. If PS/2 you will need to reboot the QBox.
2) Copy the attached license file to the root of the USB thumb drive. 
3) Ensure that your QBox is NOT actively prompting. To do that, simply exit QMaster program.
4) Plug the USB flash drive containing the license file into a USB port on the QBox. Wait approximately 10 seconds for the USB flash drive to be registered. 
5) Press [F8] on the keyboard connected to the QBox to open the configuration menu. 
6) Choose license update from the configuration menu.
7) QBox will report license update successful.
8) When the QBox tells you to press any key to reboot, do so. Unplug the USB flash drive at this point.
9) Unplug the keyboard.

If any problems with QBox not updating the license:

- Try a different brand USB drive. The QBox is very picky about the type of USB drive.
- Try renaming the license file to qbox-license.bin (r1 QBox) or qbox-license.sec (r2 QBox) and repeat the license update procedure above.
- Call or email support, provide any error messages if possible.